Reader question: A carrying broker-dealer can hold customer cash, margin loans, securities borrows, securities loans and settlement receivables at the same time. How does the SEC decide how much customer-derived cash must be segregated in a reserve bank account instead of being used in the broker-dealer’s own business?
The core mechanism is the Customer Reserve Formula in Exchange Act Rule 15c3-3 and Exhibit A. The formula classifies specified customer-related balances into Credits and Debits. Credits broadly represent cash the broker-dealer owes customers or cash generated from the use of customer securities. Debits broadly represent permitted customer-related uses of funds, such as qualifying customer debit balances, securities borrowed for customer transactions and specified clearing margin.
If total credits exceed total debits, the broker-dealer must maintain at least the required net amount in a Special Reserve Bank Account for the Exclusive Benefit of Customers. A separate PAB reserve account applies to proprietary accounts of other brokers and dealers.
The mathematics is simple. The classification, timing and data provenance are not.
What this page owns — and what it does not
This page owns:
customer/PAB ledger and settlement balances → Rule 15c3-3 credit/debit classification → reserve requirement → segregated bank-account deposit.
It does not replace double-entry ledger mechanics, securities settlement, or broker-dealer net-capital calculations. The reserve formula is specifically a customer-protection segregation mechanism.
This is public regulatory mathematics, not legal or compliance advice for a specific broker-dealer.
The conservation idea
Let:
- C = total reserve-formula credits;
- D = total reserve-formula debits after the applicable regulatory adjustments.
A simplified reserve requirement is:
Required Reserve = max(C − D, 0).
If credits are 9.2 billion and allowable debits are 7.6 billion:
Required Reserve = 1.6 billion.
That amount must be maintained in the customer reserve bank account subject to the rule’s timing and eligible-asset requirements.
Why the formula exists
Without segregation, a broker-dealer could temporarily finance proprietary trading, underwriting, overhead or other firm activity using cash economically owed to customers.
Rule 15c3-3 is designed to reduce that dependency. The firm may use customer-related credits only to the extent matched by permitted customer-related debits. The excess must be segregated.
So the formula is not merely an accounting report. It creates a boundary around how customer-derived resources may finance the broker-dealer.
Exhibit A: the credit side
Current FINRA-published SEC interpretations reproduce the Exhibit A credit items. Important examples include:
- free credit balances and other credit balances in customer securities accounts;
- monies borrowed collateralized by securities carried for customers;
- monies payable against customers’ securities loaned;
- customers’ securities failed to receive;
- specified firm-account credits attributable to principal sales to customers;
- aged stock distributions, short security-count differences and suspense items under the rule’s conditions.
The common theme is that these balances represent customer-related funding, obligations or assets that the firm has monetized.
Free credit balances
A customer sells stock and leaves the cash in the brokerage account.
If the customer has no offsetting debit under the rule’s account-netting framework, that free credit balance is money the firm owes the customer.
It therefore enters the credit side of the reserve formula.
Conceptually:
Customer Cash Payable ↑ → Reserve Credits ↑ → Potential Reserve Deposit ↑.
Customer securities used to obtain funding
If a broker-dealer borrows money against customer securities or lends customer securities and receives cash collateral, the transaction can generate funding for the firm.
Rule 15c3-3 generally treats customer-related funding on the credit side so the firm cannot use that financing without recognizing the corresponding customer-protection obligation.
Fails to receive as a credit
Suppose a customer bought securities and paid the broker-dealer, but the securities have not yet been received from the delivering counterparty.
The broker-dealer may hold customer funds while still waiting for the securities.
Under Exhibit A, qualifying customers’ securities failed to receive are credit items.
This connects directly to the settlement-fail state machine.
The debit side
Important debit items include:
- qualifying debit balances in customer cash and margin accounts;
- securities borrowed to effectuate customer short sales or customer fails to deliver;
- customers’ fails to deliver within the applicable aging rules;
- specified margin deposited with OCC for customer option positions;
- specified clearing-agency or DCO margin related to customer security futures and portfolio-margin positions.
The debit side is not “all assets related to customers.” Each item must satisfy the rule and interpretations.
Customer margin debit balances
Suppose a customer has:
- $100,000 of securities;
- $40,000 margin debit.
The broker-dealer has financed part of the customer’s position.
A qualifying customer debit balance can enter the debit side because customer-derived credits are being used to finance customer activity rather than the firm’s own business.
Why questionable receivables do not get unlimited debit credit
A debit is useful in the reserve formula only if it represents a qualifying, collectible customer-related use of funds.
If an account is doubtful of collection or otherwise excluded under the rule, treating it as a full debit would allow the broker-dealer to reduce segregation with an asset that may not be realisable.
This is a recurring financial-regulation pattern:
nominal receivable ≠ automatically allowable regulatory asset.
The reserve formula is not identical to a balance sheet
Accounting assets and liabilities answer:
What does the entity own and owe?
The reserve formula asks:
How much customer-derived value must be segregated under the customer-protection rule?
The same transaction can therefore appear differently in GAAP financial statements and in the regulatory reserve computation.
Customer reserve and PAB reserve are separate owners
Rule 15c3-3 requires a separate:
- Customer Reserve Bank Account; and
- PAB Reserve Bank Account for proprietary accounts of brokers and dealers.
The accounts are not one pooled segregation account.
That means:
customer credits/debits → customer computation
PAB credits/debits → PAB computation.
Misclassifying another broker-dealer’s proprietary account as an ordinary customer can distort both calculations.
Current 2026 change: large carrying firms compute daily
A major current rule change became operational in 2026.
Broker-dealers with average total credits equal to or greater than $500 million are required to perform customer and PAB reserve computations daily under Rule 15c3-3(e)(3)(i)(B)(1).
The first required cohort, based on the 12 month-end FOCUS Reports from January through December 2025, had to begin required daily computations no later than June 30, 2026.
Average total credits is based on the arithmetic mean of Customer Reserve plus PAB Reserve total credits reported in the 12 most recently filed month-end FOCUS Reports.
Why daily frequency matters
Imagine a carrying broker-dealer receives a large customer cash inflow on Monday.
Under a weekly computation, the required reserve deposit might not update until after the week closes.
Under daily computation:
today’s customer-credit state → tomorrow’s computation → deposit process
with much less time for a large mismatch to persist.
Deposit timing
For required daily computations, the computation is made as of the close of the previous business day, and any required deposit must be made no later than one hour after the opening of banking business on the second following business day.
Weekly computations use the same broad deposit deadline relative to the computation date.
The time lag is therefore an explicit part of the algorithm.
Small firms can qualify for monthly computation
Rule 15c3-3 retains a limited monthly-computation alternative for qualifying broker-dealers whose:
- aggregate indebtedness does not exceed 800% of net capital; and
- aggregate customer funds do not exceed $1 million under the applicable test.
Under that alternative, the rule requires a deposit of at least 105% of the computed amount.
This compensates partly for the longer interval between computations.
Daily computation and the 2% aggregate-debit adjustment
The 2024 amendments also changed a technical interaction with the alternative net-capital method.
Certain carrying broker-dealers that perform a daily customer reserve computation may use a 2% reduction in aggregate debit items rather than the former 3% reduction.
If gross aggregate debit items are 8.0 billion:
2% reduction → adjusted debits = 7.84bn.
3% reduction → adjusted debits = 7.76bn.
The smaller 2% reduction permits 80 million more debit recognition in this simple example, lowering the segregation amount relative to a 3% reduction while still operating inside the new daily-computation regime.
This should not be confused with the 2% minimum-net-capital test under the alternative method of Rule 15c3-1. They are two different regulatory percentages applied to different objects.
Reserve bank account assets
The reserve account is not an ordinary operating account.
Rule 15c3-3 restricts how the account is maintained and requires the bank to recognize its special status.
The firm may use cash and qualifying securities under the rule, subject to eligibility and concentration restrictions.
The objective is to keep segregated assets available for customers rather than exposed to ordinary firm creditors and proprietary use.
Bank concentration controls
Rule 15c3-3 includes restrictions on reserve cash deposited with banks, including limits tied to the equity capital of a non-affiliated bank and restrictions involving affiliated banks.
This prevents the customer-protection reserve from becoming heavily exposed to one weak or affiliated banking institution.
Segregation therefore has two dimensions:
- separate customer assets from broker-dealer use;
- control where those segregated assets are placed.
Possession or control is the securities-side companion
Reserve cash protection is only half the customer-protection architecture.
Rule 15c3-3 also requires broker-dealers to obtain and maintain possession or control of customers’ fully paid and excess margin securities under the rule.
A carrying firm can therefore pass the cash reserve computation and still have a securities-custody problem.
The two invariants are:
customer cash segregation
and:
customer securities possession/control.
Excess margin securities and the 140% concept
FINRA’s current SEC interpretations describe excess margin securities broadly as customer margin securities with market value exceeding 140% of the customer’s net debit balance.
If a customer has a $50,000 net debit:
140% × 50,000 = $70,000.
Margin securities above the applicable level can enter the excess-margin-security control framework.
This is distinct from the reserve formula but belongs to the same customer-protection system.
A simplified reserve example
Suppose a customer reserve computation contains:
- free credit balances: 5.0bn;
- customer securities loan credits: 1.2bn;
- fails-to-receive credits: 0.8bn;
- other qualifying credits: 0.5bn.
Total credits:
C = 7.5bn.
Qualifying debits after regulatory adjustment:
- customer margin debits: 4.5bn;
- customer securities borrowed: 0.7bn;
- customer fails to deliver: 0.4bn;
- clearing margin debits: 0.6bn.
Total debits:
D = 6.2bn.
Required reserve:
7.5 − 6.2 = 1.3bn.
The example is simplified; actual Exhibit A classification and adjustments must follow the full rule and interpretations.
Evidence polarity: what supports confidence?
Evidence for a reliable reserve calculation includes:
- credit/debit totals trace to customer subledgers and settlement systems;
- customer and PAB populations are separated correctly;
- daily-computation threshold is calculated from 12 filed month-end FOCUS Reports;
- required deposits reconcile to bank confirmations;
- fails aging matches settlement records;
- stock borrow/loan allocations match customer positions;
- the applicable 2% or 3% debit adjustment is versioned correctly;
- possession/control deficits are monitored separately.
Evidence against confidence includes unexplained reserve withdrawals, stale FOCUS inputs, customer credits netted against unrelated proprietary receivables, one reserve bank account used for both customers and PAB accounts, or reserve deposits that do not reconcile to the computed requirement.
Counterexample: a broker-dealer can have positive net worth and still owe a large reserve deposit
The reserve formula is driven by customer obligations, not simply by the firm’s accounting equity.
A profitable broker-dealer can still have billions of net customer credits that must be segregated.
Counterexample: a customer debit does not always eliminate a customer credit
Debit recognition is rule-based.
A doubtful, unsecured or otherwise excluded receivable cannot necessarily be used at full value to reduce reserve credits.
Counterexample: weekly logic can be obsolete for a large firm in 2026
A carrying broker-dealer above the $500 million average-total-credits threshold that should be computing daily cannot keep using an old weekly scheduler after June 30, 2026.
Frequency is now an algorithmic compliance state.
Counterexample: reserve cash and net capital are not interchangeable
Customer reserve cash is segregated for customer protection.
Net capital measures liquid financial resources supporting the broker-dealer.
One does not substitute for the other.
Weak links in implementation
Customer/PAB misclassification. Accounts enter the wrong reserve formula.
Credit-sign error. Customer payable balances reduce rather than increase reserve credits.
Debit over-recognition. Nonqualifying receivables are used to lower the reserve.
Fail-aging error. Securities fails remain in the wrong formula item after aging thresholds change.
Daily-threshold staleness. The 12-month average-total-credits test is not refreshed.
Deposit timing error. Required deposit is made outside the rule’s banking-business deadline.
Debit-adjustment error. 2%/3% treatment is applied under the wrong computation regime.
Bank-account control failure. Reserve cash is commingled with an operating account.
Diagnostics: how to test the engine
- Exhibit A replay: reconstruct every credit and debit from raw books and records.
- sign test: increasing a free credit balance must not reduce required reserve.
- customer/PAB separation test: move a test account between classifications and verify only the correct formula changes.
- $500m threshold test: compute the arithmetic mean of the latest 12 month-end total-credit reports.
- frequency test: required daily firm cannot silently revert to weekly.
- deposit reconciliation: bank-confirmed reserve amount must meet or exceed the required amount.
- fail-aging test: advance settlement fails through aging boundaries.
- 2%/3% test: apply the correct debit adjustment for the firm’s current regime.
- monthly exception test: validate both the $1m customer-funds and 800%-AI conditions before allowing monthly computation.
- possession/control cross-check: reserve compliance must not suppress separate securities-control exceptions.
What would falsify confidence?
Confidence should be withdrawn if the computation cannot be reproduced from the books and records; if customer/PAB totals do not reconcile to FOCUS reporting; if reserve-account balances are below the required amount without an explained lawful timing state; if a daily-computation firm uses stale weekly logic; or if unexplained manual overrides determine major formula items.
Alternatives and limits
Rule 15c3-3 applies to broker-dealers and does not function like bank reserve requirements, Basel liquidity ratios or deposit insurance.
The public formula can be modelled educationally, but real firms must follow the exact current rule, SEC/FINRA interpretations, account classifications and designated-examining-authority requirements.
Verification and update triggers
Preserve the Rule 15c3-3/eCFR version, FINRA interpretation version, FOCUS-report inputs, customer/PAB classifications, Exhibit A mapping, computation frequency, debit-reduction regime, reserve-bank confirmations and possession/control reports. Revalidate after SEC amendments, FINRA interpretation updates, a crossing of the $500m threshold, material business-model changes or any reserve-account deficiency.
Primary and high-quality references
- Electronic Code of Federal Regulations, 17 CFR §240.15c3-3 — Customer protection: reserves and custody of securities.
- FINRA, SEA Rule 15c3-3 and Related Interpretations, current 2025/2026 guidance.
- FINRA, SEA Rule 15c3-3a Exhibit A and Related Interpretations.
- U.S. SEC, Daily Computation of Customer and Broker-Dealer Reserve Requirements under the Broker-Dealer Customer Protection Rule, including June 30, 2026 compliance date.
- U.S. SEC Division of Trading and Markets, FAQs on Daily Customer and PAB Reserve Computations, December 8, 2025.
Educational boundary: This article explains public broker-dealer customer-protection mechanics. It does not determine the legal reserve requirement of a real firm and does not provide legal, compliance or personalized financial advice.

